If you wish to Force Flash different firmware on to your ESC’s, follow this guide.

The following is to only be done at your own risk, only do the following if you know what you are doing.

1WIRE Commands (Must have battery plugged in and Props removed).

All commands are entered without quotations. 

“1wire read”

“1wire list”

“1wire m0/1/2/3=forceupgrade=X”  (X is the listed firmware POSITION number you wish to flash, refer to the example list below, but    always use “1wire list” to get the latest listings).

“1wire stop”

m0 = Motor 1, m1 = Motor 2, m2 = Motor 3, m3 = Motor 4

Example- “1wire m0=forceupgrade=6” this will upgrade m0 (motor 1) with “#B_H_00#” firmware.

Example Firmware List – use “1wire list” to retrieve the latest list.  

#ss ESC POSITION:1 HEX:#A_H_15#
#ss ESC POSITION:2 HEX:#A_H_20#
#ss ESC POSITION:3 HEX:#A_H_30#
#ss ESC POSITION:4 HEX:#A_H_50#
#ss ESC POSITION:5 HEX:#A_H_70#
#ss ESC POSITION:6 HEX:#B_H_00#
#ss ESC POSITION:7 HEX:#C_H_15#
#ss ESC POSITION:8 HEX:#C_H_20#
#ss ESC POSITION:9 HEX:#C_H_25#
#ss ESC POSITION:10 HEX:#C_H_30#
#ss ESC POSITION:11 HEX:#C_H_40#
#ss ESC POSITION:12 HEX:#C_H_50#
#ss ESC POSITION:13 HEX:#DYS_XM20A#
#ss ESC POSITION:14 HEX:#FC_Rapt390_20A#
#ss ESC POSITION:15 HEX:#FVTLibee20A#
#ss ESC POSITION:16 HEX:#FVTLibee20APro#
#ss ESC POSITION:17 HEX:#FVTLibee30A#
#ss ESC POSITION:18 HEX:#F_H_00#
#ss ESC POSITION:19 HEX:#F_H_40#
#ss ESC POSITION:20 HEX:#G_H_30#
#ss ESC POSITION:21 HEX:#G_L_30#
#ss ESC POSITION:22 HEX:#J_H_15#
#ss ESC POSITION:23 HEX:#J_H_70#
#ss ESC POSITION:24 HEX:#J_H_90#
#ss ESC POSITION:25 HEX:#L_H_00#
#ss ESC POSITION:26 HEX:#M_H_30#
#ss ESC POSITION:27 HEX:#Q_H_20#
#ss ESC POSITION:28 HEX:#RotorGeeks20A#
#ss ESC POSITION:29 HEX:#RotorGeeks20AP#
#ss ESC POSITION:30 HEX:#XRotor20A#
#ss ESC POSITION:31 HEX:#XRotor40A#
#ss ESC POSITION:32 HEX:#A_H_15#
#ss ESC POSITION:33 HEX:#A_H_20#
#ss ESC POSITION:34 HEX:#A_H_30#
#ss ESC POSITION:35 HEX:#A_H_50#
#ss ESC POSITION:36 HEX:#A_H_70#
#ss ESC POSITION:37 HEX:#B_H_00#
#ss ESC POSITION:38 HEX:#C_H_15#

 

LEAVE A REPLY

Please enter your comment!
Please enter your name here